TRUCUT - BIMETAL BANDSAW: M42 COBALT & MATRIX (M31/M2)

*Bandsaw blade with teeth of high performance M42 high speed cobalt steel or matrix high speed steel and backing material in alloy tempered steel. Welded to length.*

Tel: - 01989 769371  Fax: - 01989 567360  spursidesawworks@btinternet.com 

LENGTH IN INCHES	LENGTH IN METRES	1/2" 13mm	1/2" 13mm	1/4" 3/8" 1/2" 6     10    13	3/4" 20mm	1" 27mm	1 1/4" 34mm
Over Up to & inc	Over Up to & inc	.020	.025	.035	.035	.035	.042
-96	-2.44	£22.85	£22.75	£23.75	£24.35	£24.90
96 -102	2.44-2.59	£29.30	£23.45	£26.95	£27.50	£28.15
102-108	2.59-2.74	£32.60	£26.60	£27.65	£30.75	£31.40
108-114	2.74-2.90	£33.45	£27.25	£30.85	£31.45	£32.20
114-120	2.90-3.05	£34.30	£27.95	£31.55	£32.15	£32.95
120-126	3.05-3.20	£35.10	£31.00	£32.30	£32.90	£33.13	£44.15
126-132	3.20-3.35	£35.95	£31.75	£32.95	£33.60	£33.90	£45.10
132-138	3.35-3.50	£36.75	£32.40	£33.65	£34.33	£34.65	£46.10
138-144	3.50-3.66	£42.60	£33.10	£34.40	£35.00	£35.40	£52.10

Prices above 12 foot available by quotation. 1½" .050 41 mm, 2" .050 54mm, 2" .062 54mm also available.

Prices plus P&P at cost and VAT. Discounts available for quantity.

SPECIFICATIONS FOR BIMETAL BANDSAWS: M42
WIDTH & THICKNESS		TEETH PER INCH
inches	mm	constant pitch	variable pitch
¼ x .035	6 x 0.90	14	10/14
⅜ x .035	10 x 0.90	4* 6* 10 14	10/14*
½ x .020	13 x 0.50	14 24	10/14* 14/18*
½ x .025	13 x 0.65	6 10 14	6/10 8/12 10/14
½ x .035	13 x 0.90	3 4 8* 10* 14	6/10* 8/12* 10/14
¾ x .035	20 x 0.90	10 14	4/6 5/8 6/10 8/12 10/14
1 x .035	27 x 0.90	3 4	2/3 3/4 4/6 5/8 6/10 8/12 10/14
1¼ x .042	34 x 1.10	4*	2/3 3/4 4/6 5/8 6/10 8/12
1½ x .050	41 x 1.30		2/3 3/4 4/6 5/8
2 x .050	54 x 1.30		1.1/1.5* 2/3* 3/4 4/6*
2 x.062	54 x 1.60		1.1/1.5* 2/3* 3/4 4/6*

SPECIFICATIONS FOR BIMETAL BANDSAWS: (M31/M2)
WIDTH & THICKNESS		TEETH PER INCH
inches	mm	constant pitch	variable pitch
¾ x .035	20 x0.90	10 14	4/6 5/8 6/10 8/12
1 x .035	27 x0.90	3 4	2/3 3/4 4/6 5/8 6/10 8/12
1¼ x .042	34 x 1.10		3/4 4/6 5/8 6/10 8/12